Omega AU-95TM Dual Radar Proximity Motion Sensor AU94TM

Description

Omega AU-94TM Dual Zone Proximity Radar Motion Sensor
Miniature Dual Zone Proximity Sensor The AU-94TM is designed to provide both an internal and external zones of protection for the vehicle. When the exterior zone is penetrated by someone, a pre-warn signal is generated and sent to the security system's pre-warn input. When the interior zone is violated, the system immediately triggers.
Dual zone sensing
Protects both inside and outside of the vehicle
Each zone is independently adjustable
LED sensitivity test light
Pre-wired 4-pin plug allows easy connection to all Omega systems
AU94TM
The Crime Guard AU94T 2-zone, 2-stage radar motion sensor uses radar to detect movement inside or just outside your vehicle. Interior and exterior protection zones are independently adjustable. When the exterior zone is penetrated, a pre-warning chirp results. When the interior zone is entered a full siren blast is triggered.
A 30" wire bundle plugs into your Crime Guard alarm brain. Two-sided tape and a wire tie are provided for installation. Dimensions: 2-1/4"L x 3-1/2"W x 7/8"D.
Features
General Overview:
This sensor uses radar to detect movement inside and directly outside the vehicle in which it has been installed. The sensor provides two zones of protection; one zone is made to trigger an alarm's pre-warning input when movement is detected just outside of the vehicle, and the other zone is made to trigger a full alarm warning when movement is detected inside the vehicle. The dual zone operation of this sensor makes it especially well suited for use in convertibles and cars with t-tops or a sunroof. The sensor has no mounting holes, so double sided tape, Velcro or wire ties will be needed to mount the sensor.
Sensor Adjustments:
There are separate adjustments for the interior and exterior sensor zones.
Connections:
Red wire
connects to 12V constant power
Black wire
connects to ground (or neg. while armed output on an alarm)
Blue wire
is the main negative trigger output
Green wire
is a pre-warning negative trigger output